Black Widow Security BW 3 Channel Installation Manual

Browse online or download Installation Manual for Security access control systems Black Widow Security BW 3 Channel. Black Widow Security BW 3 Channel Installation manual User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
BW-2500
PREMIER
PLUS
INSTALLATION MANUAL
Please read this Manual carefully before attempting to install this system.
BEFORE INSTALLING THE BW-2500 PREMIER PLUS
• DO read through this installation manual.
• DO NOT install the alarm brain in an engine compartment.
The alarm may arm itself when power is first connected.This is a normal condition.
ITEMS SUPPLIED WITH THE BW-2500
BWS-2502 Receiver and Control Module BWS-260 Valet Switch
BWS-385 2-Button, 3-channel, Code BWS-180 LED Status Indicator
Learning Transmitters (2)
BWS-12025 Wiring Harness, Fuseholder,
MTS-20W Programmable, Multi-tone, and Fuse
120 dB Siren
SPDT Relay
BWS-296 Dual Zone Electronic BRS-003 Relay Socket
Shock Sensor
OPTIONAL ACCESSORIES Backup Battery ..................................................BWS-500
Radar Field Sensor.........................................MAS-2 Remote Starting.................................................RAS-101
Window Rollup.............................................WRM-2 Leather Transmitter Case ...............................BWS-390
Power Door Lock........................................PDL-50 Trunk Release ........................................................TR-100
SPECIFICATIONS
Operating voltage...............+12 VDC Neg. Ground
Code Learning ......................................3 Codes Max.
Current consumption.........5 mA (max) disarmed.
Siren output drive ......................................3 Amperes
Automatic reset........................................60 seconds.
Door Lock/Unlock Output ...................(-) 500 mA.
Channel 2 Output Drive........................(-) 500 mA.
Channel 3 Output Drive..................(-) 500 mA, variable.
Remote control transmit freq.............................310 mHz.
Passive arming delay............................30 Seconds approx.
Auxiliary output drive..........................250 mA maximum.
Flashing output drive............................10 Amp maximum.
Trigger inputs..............................................1) Neg. pnswtch.
1) Pos. pnswtch. 1) Neg. sensor or aux. pnswtch.
Dome light output.....................................500 mA ground.
Page view 0
1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - INSTALLATION MANUAL

BW-2500PREMIERPLUSINSTALLATION MANUALPlease read this Manual carefully before attempting to install this system.BEFORE INSTALLING THE BW-2500 PREMIER

Page 2

- 1 -INSTALLATION INSTRUCTIONSIMPORTANT: Make all wiring connections to the vehicle before connecting the main 14-pin and auxiliary 2-pin connector ha

Page 3

- 2 -10. Complete the general wiring of the main harness by connecting...A. The RED wire to a source of CONSTANT +12vdc. IMPORTANT: Remove the 15 amp

Page 4 - 14-PIN HARNESS

- 3 -CONNECTOR PIN NUMBERS AND WIRE COLOR CODES14-PIN HARNESS# COLOR FUNCTION NOTES1) Red +12 VDC Main Power. Connect this wire to the POSITIVEtermina

Page 5 - WIRING DIAGRAM

RECEIVERMODULEHARNESSBLUEWHITEBLUE/WHITEGROUNDBLUELEDTO VIOLETWIRE ONHARNESS12V FLASHINGLIGHT OUTPUT(10 AMPS)SEE PAGE 5SEEPAGE 5VARIABLEOUTPUTVALETSWI

Page 6 - INSTRUCTIONS:

- 5 -POWER DOOR LOCKINSTRUCTIONS: The BW-2500 comes equipped to handleground door lock installations.The Yellowand Green wires from the ReceiverModule

Page 7 - TROUBLESHOOTING

- 6 -TROUBLESHOOTINGPROBABLE SUGGESTEDSYMPTOM CAUSE CORRECTIONUnit is triggered any BLUE wire is shorted to ground Disconnect the wire to see iftime i

Page 8 - LIMITED LIFETIME WARRANTY

LIMITED LIFETIME WARRANTYThe Black Widow Division of DLC, Inc. warrants to the original purchaser that the vehi-cle alarm system purchased will be fre

Comments to this Manuals

No comments