Black Widow Security BW RAS 130 Installation Manual

Browse online or download Installation Manual for Security access control systems Black Widow Security BW RAS 130. Black Widow Security BW RAS 130 Installation manual User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
REMOTE AUTO START
FOR KEYLESS ENTRY AND ADD-ON REMOTE START MODULES
BEFORE INSTALLING THIS PRODUCT PLEASE READ
THIS INSTALLATION MANUAL THOROUGHLY!!
INSTALLATION MANUAL
This remote start product is intended for installa-
tion on vehicles equipped with automatic transmis-
sions and electronic fuel injection only!
DO NOT INSTALL THIS UNIT INTO A MANUAL
TRANSMISSION VEHICLE AS IT COULD RESULT IN
SERIOUS INJURY OR DEATH.
This product must be installed by qualified per-
sonnel according to these instructions and
observing all safety features.
• The system should be placed into the valet
mode when parked inside a garage or being left for
service.
Always notify service personnel that the vehi-
cle is equipped with a Remote Starter.
Only start the vehicle in a well ventilated area.
Do not use in a closed garage or indoors.
ITEMS INCLUDED:
Main unit
Remote transmitter(s)*
Plug In LED
Plug in program switch
Harness kit with 2 heavy duty fuse holders
Hood pinswitch
Extended range receiver module*
Owners manual
*
S models are provided with single transmitter only.
Add-on modules do not include transmitters.
OPTIONAL ACCESSORIES:
VAC-10 Vacuum Switch Kit
APP-1 Universal OEM transponder bypass kit
APV-1 GM VATS, Passlock I&II bypass kit
PDLM-3 Power door lock relay module
Before you begin the installation:
Verify that the vehicle is equipped with elec-
tronic fuel injection.
Verify that the vehicle is equipped with an auto-
matic transmission.
Check to see if the vehicle is equipped with any
type of factory security system.
Check to see if there is a pinswitch for the
hood, if not one must be installed.
Verify that the vehicle starts and idles proper-
ly before you start the installation.
Verify with the customer the desired location
for the program switch and LED.
Always use a multimeter when verifying vehi-
cle wiring.
Remote Start Installation Notes:
The remote start unit senses the vehicles success-
ful start using one of the following methods:
1. Current sense
2. Tachometer sense
3. Spark or coil wire sense
4. Using optional vacuum switch.
Page view 0
1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - REMOTE AUTO START

REMOTE AUTO STARTFOR KEYLESS ENTRY AND ADD-ON REMOTE START MODULESBEFORE INSTALLING THIS PRODUCT PLEASE READTHIS INSTALLATION MANUAL THOROUGHLY!!INSTA

Page 2

If the Current Sense feature of the remote startunit does not allow proper operation, the tachsense/spark sense wire may be used, or an option-al vacu

Page 3

• GRAY WIRE - Ground When Running Output (-).Connect to a relay for starter anti-grind protection.(See installation diagrams). The GRAY wire pro-vide

Page 4 - Remote Programmable Features:

equal to the feature you wish to change. TheLED and parking lights will flash each time theswitch is pushed. (Example: to program feature #3press the

Page 5

Valet ModeWhen the Valet mode is activated, the vehicle willnot start using the remote, but keyless entry func-tions will still operate.To enter valet

Page 6

6FIGURE 1. OPTIONAL VACUUMSYSTEM HOOK-UPVACUUMSWITCHEXISTING CARVACUUM HOSEYELLOWGROUNDEXISTING CARVACUUM HOSEFor vacuum switch hook-up dip switch #2=

Page 7 - REMOTE START TROUBLESHOOTING

7ProblemUnit will not operate.Keyless Entry features operatebut vehicle will not start.Vehicle will not remote start.Engine cranks but not longenough

Page 8 - Relay Module (not included)

8POSITIVE TRIGGER DOOR LOCK CIRCUIT:REVERSE POLARITY (ADDING ACTUATORS):REVERSE POLARITY USING FACTORY SYSTEMS:GROUNDGREEN WIREGROUNDBLUE WIREGREEN WI

Comments to this Manuals

No comments