Black Widow Security BW FM 250 User Manual download pdf (Page 2)

Security System Operation

ARMING OPERATION

To arm the system press transmitter button 1:

• The siren will chirp once.

• The parking lights will flash once.

• The doors will lock*.

• The L.E.D. will turn solid for 2 seconds

then start flashing slowly. After 10

seconds the system is armed.

* If Installed

PASSIVE ARMING

The passive arming feature allows the system to

arm automatically without any user

intervention. This feature must be programmed

during installation.

To arm the system passively:

1. Turn the ignition key off.

2. Close all doors.

• The LED will start flashing rapidly to

indicate that the system is preparing to

arm. The system can be armed at any

time by pressing transmitter button 1.

• The siren will chirp 30 seconds after

the last door is closed to indicate the

system is now armed*.

• The doors will lock**.

* As an option, the passive arming chirps can be

eliminated during programming.

** If Passive Locking is programmed during installation.

DISARMING OPERATION

To disarm the system press transmitter button 1.

• The siren will chirp twice.*

• The parking lights will flash twice.

• The doors will unlock.

• The optional illuminated entry feature will

turn on the dome light for 30 seconds.

* In the event the alarm was triggered while away, the

system will respond with 3 chirps/3 parking light flashes.

AUTO REARM FEATURE

The Auto Rearm feature allows the system to

automatically re-arm itself in the event the

system is disarmed and a door is not opened

within 30 seconds. This feature may be disabled

during installation.

NOTE: To completely disable the Auto Rearm

feature, the Passive Arming feature must also be

disabled. The Auto Rearm feature will not work on

vehicles with the illuminated entry feature enabled.

CHIRP DELETE

For full time silent operation, the ARM/

DISARM chirps can be permanently disabled.

This feature must be programmed during

installation.

IGNITION LOCK

The ignition locking feature allows the doors to

automatically lock when the ignition key is

turned on, and automatically unlock when the

ignition key is turned off. This feature may be

disabled during installation.

VALET MODE

When the system is placed into the Valet Mode,

both the remote starting feature and the

security system will be disabled. However, the

keyless entry and trunk release features will still

function. While in the Valet Mode, the Valet icon

will be displayed and LOCK or UNLOCK will

replace the ARM and DISARM indications when

button 1 is pressed.

To enter the Valet Mode:

1. Be sure the system is disarmed.

2. Turn the ignition key on.

3. Press and hold the valet/service mode

switch for 3 seconds.

• The LED will turn on solid indicating

the system is in Valet Mode.

Shock/Page -

The display will show Shock

and flash the animated icon

to indicate shock sensor

triggering.

Hood -

If the hood or trunk is opened

while the system is armed, the

display will show HOOD and

the icon will be displayed.

UNLOCK

LOCK

O.K.

Arm

Start

Confirm

FM 2-WAY SYSTEM w/ TEXT DISPLAY

Transmitter Operation

Button

III

Hold

Operation

ARM/DISARM/PANIC Button -

o arm or disarm the

system, press button 1. To activate the panic feature, press button

1 and hold for three seconds.

TRUNK Button -

To activate the trunk output, press and

hold button 3 for two seconds.

II III

PROGRAMMING Mode -

To activate the trunk output, press

and hold button 3 for two seconds.

CONFIRMATION Button -

To check current status of the

system, press button 3. The current status of the system

will be

displayed on the transmitter.

Transmitter Indications

START Button -

To start the vehicle, press and hold button 2

for two seconds. To shut down the vehicle, press and hold button

2 for two seconds.

Arm -

The display will show ARM and

the animated icon to confirm

arming.

LOCK

Door -

If a door is opened while the

system is armed, the display will

show DOOR, and the door

frame will animate.

Disarm -

The display will show DISARM

and the animated to confirm

disarming.

UNLOCK

Warn Away -

The display will show WARN if

the warning stage is triggered,

the icon will flash.

Trunk -

The display will show TRUNK

and flash the icon opening

to confirm

Panic -

The display will show PANIC

when the Arm/Disarm button

is held to enter the Panic mode.

1 2 3 4

Comments to this Manuals

No comments

Black Widow Security BW FM 250 User Manual Page 2

Comments to this Manuals

Related products and manuals for Security access control systems Black Widow Security BW FM 250